Filter
Top Products
DSPSURROUND
DSP MULTIJOG
DOW”N,UP
DSP
MANUAL
SELECT
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit your preference.
Press the DSP button, and turn the MULTI JOG until
the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
indicators P appears on the left sides of the selected DSP name
and matching GEQ mode name.
Selected pSP mode
Matching GEQ mode
To cancel the selected mode
Press the DSP button again. “DSP OFF” appears on the display.
Even if canceling the selected DSP mode, the matching or
selected GEQ mode still remains.
To select with the remote control
Press the DSP butiton repeatedly until the desired [)SP mode is
displayed.
Four DSP modes and “DSP OFF can be selected.
To adjust the volume and balance of the! surroumd
speakers
Press the MANUAI- SELEC-r button on the remote control twice
or three times, while the DSP system is turned on, lo display “S-
R OdB”(for right surround speaker) or “S-L OdB (for left surround
speaker). Then press the DOWN or UP button repeatedly within
four seconds.
Note that the surround speakers volume and balance of tlhe 5.1
CH and Dolby Pro Logic modes are also changed.
● The DSP system is automatically canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1 CH function is selected
● The DSP system cannot be turned on:
- while the 5.1 Cl-l functiorl is selected
- while headphones are plugged in
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE,
HALL or ARENA is selected, no sound will be heard from the
surround speakers.
,ENGL/!5H II
O