Aiwa XR-M150 Stereo System User Manual


 
En
ENGLISH
18
GENERAL
SPECIFICATIONS
Main unit XR-M150
FM tuner section
Tuning range 87.5 MHz to 108 MHz
Usable sensitivity (IHF) 13.2 dBf
Antenna terminals 75 ohms (unbalanced)
AM tuner section
Tuning range 530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity 350 µV/m
Antenna Loop antenna
Amplifier section
Power output 12 W + 12 W (50 Hz – 20 kHz,
T.H.D. less than 1%, 8 ohms)
15 W + 15 W (1 kHz, T.H.D. less
than 10%, 8 ohms)
Total harmonic distortion 0.07 % (7.5 W, 1 kHz, 8 ohms,
DIN AUDIO)
Inputs VIDEO/AUX: 0.4 V
Outputs SUB WOOFER: 1.0 V
SPEAKERS: accept speakers of
8 ohms or more
PHONES (stereo minijack):
accepts headphones of 32 ohms
or more
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response Normal tape: 50 Hz – 15000 Hz
Signal-to-noise ratio 50 dB
Recording system AC bias
Heads Recording/playback head × 1
Erase head × 1
Compact disc player section
Laser Semiconductor laser (λ = 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 75 dB (1 kHz, 0 dB)
Harmonic distortion 0.1% (1 kHz, 0 dB)
Wow and flutter Unmeasurable
General
Power requirements AC : 120 V, 60 Hz
Power consumption 40 W
Dimensions of main unit 168 × 256 × 255 mm
(W × H × D) (6
5
/8 × 10
1
/8 × 10
1
/8 in)
Weight of main unit 3.5 kg
(7 Ibs 11 oz)
Standby power consumption If the power-economizing mode is
on: 1.0 W
If the power-economizing mode is
off: 10 W
Speaker system SX-M150
Cabinet type 2 way, bass reflex
Speakers Woofer:
120 mm (4
3
/4 in) cone type
Tweeter:
20 mm (
13
/16 in) ceramic type
Impedance 8 ohms
Output sound pressure level 87 dB/W/m
Dimensions (W × H × D) 150 × 256 × 210 mm
(6 × 10
1
/8 × 8
3
/8 in)
Weight 2.0 kg
(7 Ibs 1 oz)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. lf this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
15-18/XR-M150<U>/Eng 10/4/2000, 5:08 PM18