Filter
Top Products
EnEn
EnEn
En
ENGLISH
8
EE
EE
E
(Españo(Españo
(Españo(Españo
(Españo
FF
FF
F
(França (França
(França (França
(França
CUSTOM AUDIO ADJUSTMENT
VOLUME CONTROL
Turn the VOLUME control on the unit, or press the VOL buttons
on the remote control.
The volume level is shown on the display for four seconds. It can
be adjusted between 0 and MAX (50). It flashes when set over
the level of 44.
The volume level remains memorized even after the power is
turned off. However, if the power is turned off when the volume
is set to 21 or more, it is automatically set to 20 the next time the
power is turned on.
To adjust the left/right balance of the front speakers
Press the BALANCE button to display “L/R 0dB”. Then press
the N(UP) or M(DOWN) button repeatedly or turn the MULTI
JOG within four seconds.
To mute the sound temporarily
Press the MUTING (MUTE) button (–20 dB).
“MUTE ON” appears on the display for four seconds. While muting
the sound, the selected function indicator flashes. Press the
MUTING button again to restore the sound.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
NOTE
Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is
originally emphasized. In this case, cancel the T-BASS system.
SOUND ADJUSTMENT DURING RECORDING
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.
SOUND
SOUND
TONE CONTROL
You can adjust the high and low range of the sound,
and up to 5 adjusted sound modes can be stored as the
preset numbers M1 to M5.
1 Press the TONE button.
2 Within 7 seconds, press the ENTER button.
3 Turn the MULTI JOG to adjust the high range of
the sound.
4 Press the M button and turn the MULTI JOG to
adjust the low range of the sound.
To re-adjust the high or low range, press the N
or M button and turn the MULTI JOG.
In steps 3 and 4, the unit returns to normal mode when no
operation is made for 4 seconds.
5 Press the ENTER button.
TONE M1 is displayed.
6 Turn the MULTI JOG to select preset number from
M1 to M5.
7 Within 4 seconds, press the ENTER button.
The adjusted sound mode is stored in the selected preset
number.
To adjust the sound temporarily
Follow the steps from 1 to 4 above. The adjusted sound
remains before changing the FUNCTION or TONE.
To select the preset mode
Press the TONE button, and turn the MULTI JOG until
the desired preset number is displayed. To cancel the
selected mode, press the TONE button twice.
When operating with the remote control, press the
TONE button repeatedly while pressing the SHIFT
button. The preset modes M1 to M5 and "TONE OFF"
can be selected.