Filter
Top Products
Main unit CX-NMT240
FM tuner section
Tuning range
87.5 MHz to 108 MHz
Usable sensivity (IHF)
13.2 dBf
Antenna terminals
75 ohms (unbalanced)
AM tuner section
Tuning range 530 kHzto 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity
350 @//m
Antenna
Loop antenna
Amplifier section
Power output
Front
20W+20 W(50Hz-20kHz, THD
less than 1%, 6 ohms)
Rear (Surround)
10W+ 1OW(1 kHz,THDlessthan
lYo, 8 ohms)
Center
20 W (1 kHz, THD less than 17., 8
ohms)
Total harmonic distortion 0.05 % (10 W, 1 kHz, 6 ohms, DIN
AUDIO/Front)
inputs VIDEO/AUX: 300 mV (adjustable)
Outputa SPEAKERS:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
SUBWOOFER: 1.1 V
PHONES (stereo Jack):accepts
headphones of 32 ohms or more
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response
50 Hz – 15000
HZ
Recording system AC bias
Heads
Deck 1:Playback head x 1
Deck 2:Recording/playback
x 1, erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W XHXD)
Weight of main unit
head
Semiconductor laser (1= 780 nm)
1 blt dual
85 dB (1 kHz, OdB)
0.05 % (1 kHz, OdB)
Unmeasurable
120 V AC, 60
HZ
Ioow
260 x 330 x 350 mm
(lol/4X 13 X137/8 in.)
7.2 kg (15 Ibs 14 OZ.)
Speaker system SX-NA332
Cabinet type
2 way, bass reflex (magnetic
shielded type)
Speakers
Woofer:
120 mm (4
3/4 in.) cone type
Tweeter:
20 mm
(13/16 in.) ceramic type
Impedance
6 ohms
Output sound pressure level 87 dB/VV/m
Dimensions (W x H x D) 234 x 324x 270 mm
(9
1/4X 12 7/8 X 10 ‘/4 in.)
Weight
2.5 kg (5 Ibs 8
OZ.)
Specifications andexternal appearanceare subject to changewithout
notice.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”, the double-D symbol DO and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B dlgtal device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
Instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the recewmg antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for hel~.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
24 ENGLISH