Acoustic Research HT60 Speaker System User Manual


 
HT60
page 3
Introduction
NOTE: Check your system immediately. If it has been damaged in transit, re-
port the damage immediately by calling your AR dealer.
Please follow the directions in this manual to achieve the best performance from your
system.
The hook-up and operation of the subwoofer is the same for a home theater surround
system and a stereo music system. The subwoofer has a built-in amplifier, making it
compatible with any sound system. In addition, the subwoofer's crossover networks
send bass-only signals to its built-in amplifier, allowing the subwoofer to add extra
bass to the output from your other speakers.
To simplify the instructions in this manual, the main speakers are referred to as the
“front speakers”. The AV receiver, stereo receiver, or integrated amplifier is referred
to as the “receiver.”
Warnings
We recommend that you not operate your speakers with the bass, treble, and loudness
controls set to full boost. This will place undue strain on the electronics and speakers
and could damage them.
The volume control setting on your receiver is not a specific indication of the overall
loudness level of the speakers. The only important consideration is the loudness level
at which the system can be played, regardless of where the volume control is set.
Whenever changing cables or pulling plugs, ALWAYS TURN OFF ALL EQUIP-
MENT. This prevents transients from entering the speakers and prevents electrical en-
ergy from reaching you.
Keep all connections out of the reach of children.
HT60.book Page 3 Monday, April 2, 2007 6:28 PM