Filter
Top Products
uS I n G Y o u r H e a d p H o n e S
8
Turning the Headphones On
1. Make sure the transmitter is plugged in and connected to an audio
source.
LINK
DC IN
LINE IN
Power
button
2. Press the power button on the right
headphone to turn the headphones
on.
3. Switch on the audio source (TV, DVD,
CD player, etc.) the transmitter is
connected to. If your audio source is a
DVD or CD player, start a disc.
4. Simultaneously press the link buttons
on the headphones and on the back
of the transmitter. The headphones
and transmitter lock onto each other
for wireless transmission. The LED
on the headphones ashes while the
devices are tuning; it stays on once
the devices are tuned.
5. Adjust the volume using the volume
up and down buttons on the right
earphone.
Link
buttons
Turning the Headphones Off
To turn the headphones off: Press and hold the power button on the
headphones for 3 seconds. Don't forget to unplug the transmitter too!
To make sure that your headphones are ready to use at all times, plug
them in when you're not using them so that they can recharge.