Acoustic Research AWD209 Headphones User Manual


 
10
• Most TVs, regardless of age or price, have variable outputs. If you
are unsure which of your TV audio outputs is xed, refer to the TV
instruction manual. Some TVs have outputs that can switch between
variable and xed. When given a choice, xed is always recommended.
Listen safely!
Enjoy your headphones at a safe volume. Avoid or limit the amount of
time you listen at higher volumes—permanent hearing loss may occur if
the headphone is used at too high a volume. If you experience a ringing
in your ears, or your own voice and other sounds seem mufed, stop
using the headphones and consult a hearing professional.
Battery life
Due to the chemistry of the headphones’ rechargeable battery,
required charging time may increase while the actual capacity of
the battery may decrease. If you have any questions regarding
the replacement of the built-in battery, please call toll-free
1-800-732-6866 or visit www.araccessories.com.
The following troubleshooting guide takes you through some of the more common
problems associated with the installation and/or operation of a wireless system. If the
problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com.
The headphones can be reset as well. If you experience persistent problems with the
headphones, see page 9 for reset instructions.
Make sure the transmitter’s power adapter is fully inserted into the wall outlet and
the power cord from the AC adapter is rmly connected to the transmitter power
input jack.
Check that the audio source component (stereo, TV, etc.) is turned on and
transmitting sound as it normally should. If you’re using a PC or DVD player, make
sure you’ve selected the correct audio output and that the sound is not muted.
No sound
uS I n G Y o u r H e a d p H o n e S
tr o u B l e S H o o t I n G