Acoustic Research ARIR150 Radio User Manual


 
19
FM Tuner
FM antenna
Uncoil the FM antenna at the back of the radio,
ensuring it is fully extended (you may even want
to tape it to the wall behind the radio if possible.
The higher the better.)
Accessing FM Radio
• Press and then press or to highlight
FM in the Source menu and then press
SELECT.
Listening to FM Radio
To select a station:
1. Press or to adjust the frequency.
2. Press and hold
or until the radio beeps
to start searching through the frequency
range. The radio stops searching when it
detects the next station.
To store the current station as a preset:
1. Select a station.
2. Press and hold P1/P2/P3/P4 to store the
current station to that preset button in Bank
1.
3. To store station in Bank 2, press BANK twice.
When the screen displays the Bank 2, press
and hold P1/P2/P3/P4 to store the current
station to that preset button in Bank 2.
4. To store station in Bank 3, press BANK thrice.
When the screen displays the Bank 3, press
and hold P1/P2/P3/P4 to store the current
station to that preset button in Bank 3.
5. To edit a preset station, repeat the steps
above to overwrite the previously stored
station.
Stereo signal indicator
To listen to a preset station:
1. Press BANK repeatedly to select from
Bank 1, Bank 2 or Bank 3. Once for Bank 1;
twice for Bank 2 and thrice for Bank 3.
P1:FM 90.9 MHz
P2:FM 90.9 MHz
P3:FM 90.9 MHz
P4:FM 90.9 MHz
2. Press P1/P2/P3/P4 to listen to the preset
station in the bank you selected.
To assign the current station as the wake
sound of the alarm clock:
1. Press OPTIONS when listening.
2. Press or to highlight Send to Alarm
and then press SELECT.