Acoustic Research ARIR150 Radio User Manual


 
15
6. Press
or to highlight one of the sources
of wake sound:
Buzzer/Beep
Presets
• Buzzer/Beep
• Presets
Read relevant sections (e.g. Internet
Radio) in this user manual to
understand how to preset stations.
7. Press SELECT on the highlighted source of
wake sound and then press or to select
the desired sound or preset item.
8. Press SELECT to confirm the selected item as
the wake sound.
When the radio loses electricity, the alarm
clock will be powered by the batteries
inserted at the back (refer to page 8). The
wake sound selected will be reverted to the
default buzzer.
When the selected sound is no longer
available, the default buzzer will sound.
To activate or deactivate the alarm clock:
1. Press ALARM.
2. Press or to highlight Turn On or Turn
Off and then press SELECT.
Turn ON
Turn OFF
Set Alarm Time
Select Sound
When the alarm is turned ON, the set alarm
time (e.g. AL: 7:00AM) will show in the lower
left corner of the clock display.
When the alarm is turned OFF, "AL: off" will
show on the clock display.
To turn off the alarm clock when it sounds:
• Press ALARM or ON/STANDBY to turn off the
alarm clock. It will sound again on the next
day if settings have not been changed.
OR
• Press SLEEP/SNOOZE to turn off the alarm
clock temporarily for extra sleep time. The
alarm will sound again after 10 minutes.
OR
The alarm clock will turn off automatically
after 60 minutes.
Sleep mode
You can set the radio to play for a set length of
time before turning off automatically.
1. Press SLEEP/SNOOZE to turn on the Sleep
mode while listening to the radio. If no
source is currently playing, the last tuned
source is started.
The default time is 60 minutes.
Sleep Timer
15 Min
2. If necessary, press SLEEP/SNOOZE again to
add extra sleep time up to 90 minutes. Each
press of the button will add 15 minutes, up to
90 minutes, then wraps to zero which turns
off the sleep mode. Adding extra sleep time
will leave the unit playing the current source.
The remaining time before turning off
automatically will show at bottom right of
the clock display, replacing the weather
information.
To cancel the Sleep mode sooner, press ON/
STANDBY or press SLEEP/SNOOZE until the
remaining time does not show at the bottom
right of the clock display.