Filter
Top Products
E-10
operation
Front panel operation
ese functions can also be controlled by the CR90
remote control. (See pages 14 for details.)
STANDBY
Press STANDBY to switch the tuner between On (green
light) and Standby (red light). (Equivalent to
P
on
remote control.)
DISP
Press DISP to cycle through the brightness settings of the
front-panel display. (Equivalent to
D
on remote control.)
MENU
Press MENU to access the setup menu. Use the
Navigation buttons to move between menu items and
the Control knob to change settings within an item.
(Equivalent to
U
on remote control.)
Navigation buttons
Use
6
or
5
to change signal sources between AM,
FM, DAB*, Sirius* and iPod/Aux (Equivalent to
M
on
remote control). e Navigation buttons are also used to
move between items in the setup menu.
INFO
Press INFO to change the type of information shown on
the second line of the front panel display, depending on
the source signal. (Equivalent to
i
on remote control.)
OK
Press OK to conrm a digital radio channel selection or a
preset selection. (Equivalent to
O
on remote control.)
Control knob
Used to manually tune stations by selecting a frequency, or
to cycle through stations (DAB, Sirius) or stored presets.
Also used to select settings within a setup menu item.
Preset buttons (1–8, 2–9, etc.)
Press a Preset button briey to select the rst preset
number listed (Preset 1, for example). Press and hold
the button for one second to select the second number
listed (Preset 8, for example). In this way, up to 14 preset
stations can be accessed from the front panel.
To access stations beyond 14 (up to a maximum of 100),
use the remote control, or the Control knob with
OK.
PRESET
Press PRESET to recall a station or channel stored as a
preset. You can quickly cycle through all the presets
using the Control knob, selecting a preset value with the
OK button (see page 13).
Alternatively, use the numeric keypad on the remote
control to select a preset directly.
STORE
is button allows you to assign a currently tuned radio
station to the next free preset number – or to a chosen
preset number. See ‘Storing a preset’ on page 13.
* Where tted/available