Filter
Top Products
A65/A75/P75
3
Using this handbook
Contents
Safety guidelines 2
Safety instructions 2
Safety compliance 2
Using this handbook 3
Models covered 3
Safety 3
Installation: A65 and A75 4
Positioning the unit 4
Connecting to loudspeakers 4
Connecting to a power supply 4
Connecting to other equipment 5
Using the amplifi ers 6
Recording onto tape 6
Using a remote control 6
Using the remote control 7
CR-389 remote control 7
Installation: P75 8
Loudspeaker connection 8
Connecting to other equipment 8
Connecting to a power supply 8
Using the power amplifi er 8
Bi-wiring and bi-amping loudspeakers 9
Before you start 9
Bi-wiring your loudspeakers 9
Bi-amping your system 9
Technical specifi cations 10
Guarantee 11
On-line registration 11
This handbook has been designed to give you all the
information you need to install, connect, set up and use the
Arcam A65, A75 and P75 amplifi ers. The remote control
handset supplied with the equipment is also described.
It may be that your amplifi er has been set up as part of your
system installation by a qualifi ed Arcam dealer. In this case, you
may wish to skip the sections of this handbook dealing with
installation and setting up the unit. Use the Contents list on this
page to guide you to the relevant sections.
Models covered
This handbook covers two integrated amplifi ers:
A65
A75
and one power amplifi er:
P75
These amplifi ers have many features in common.
Both the A65 and A75 have remote controlled input selection
and a motorised volume control which can be operated by the
CR-389 remote control handset supplied.
Safety
Safety guidelines are set out on the inside front cover of this
handbook.
Many of these items are common sense precautions, but for
your own safety, and to ensure that you do not damage the unit,
we strongly recommend that you read them.