3M X95 Home Theater System User Manual


 
33
[IMAGE] Tab
Function General Description
Aspect Switches the mode for aspect ratio.
Normal / 4:3 / 16:9 / 16:10 / 14:9
Over Scan Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Position Adjusts the display position.
[
]: Increase the vertical position value.
[
]: Decrease the vertical position value.
[
]: Increase the horizontal position value.
[
]: Decrease the horizontal position value.
H Phase Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
H Size Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust [Execute]: Performs the automatic adjustment feature.
Reset Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function General Description
Progressive Switches the progress mode.
TV / FILM / Off
Video NR Switches the noise reduction mode.
High / Mid / Low
Color Space Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Component Switches the function of the COMPONENT port.
Component / Scart RGB
S-Video Format Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
C-Video Format Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Frame Lock - Computer in1 Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Frame Lock - Computer in2 Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Computer in1 Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Computer in2 Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
[SETUP] Tab
Function General Description
Auto Keystone [Execute]: Performs the automatic keystone distortion correction.
Keystone V Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Eco Mode Turns off/on the eco mode.
Normal / Eco
Mirror Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Standby Mode Switches the standby mode setting.
Normal / Saving
Monitor Out - Computer in1 Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Monitor Out - Computer in2 Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Monitor Out - Component Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Monitor Out - S-Video Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Monitor Out - Video Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Monitor Out - Standby Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Reset Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.