Filter
Top Products
42
CL86X / PL96X / X56
[STATUS] Tab
Function General Description
Power Displays the current power status.
On / Standby / Cool down
Input Source Displays the current Input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video
Error Status Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /
Other Error
Blank On/Off Displays the current blank on/off status.
On / Off
Mute Displays the current mute status.
On / Off
Freeze Displays the current freeze status.
Normal / Freeze
Lamp Time Displays the usage time for the current lamp.
Filter Time Displays the usage time for the current filter.
Stack Mode Displays the stack mode status.
Main / Sub
This item is not displayed when stack mode status is off.
Reset Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function General Description
Brightness Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Gamma Switches the gamma mode.
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Color Temp Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Color Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Active Iris Changes the active iris control mode.
Presentation / Theater / Off
My Memory Saves the current adjustment data into the memory.
Save-1 / Save-2 / Save-3 / Save-4
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
[Execute]: Performs each function.
Reset Initialize the selected function.
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.