17
Program the Water Softener -- Model WHES20
UP button
DOWN Button
PROGRAM button
RECHARGE button
Display
PRESSTOSCHEDULE
HOLDTOST ART
+
−
PROGRAM
RECHARGE
Figure 10
If you have questions about installation, programming, operating and routine maintenance...
call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electric al outlet, a model code and a test number (example:
s3.0), begin to flash in the faceplate display. Then, 12:00 PM andthe words “PRESENT TIME” begin
to flash.
NOTE: If -- -- -- -- show s in the display, press the UP
+
or DOW N
−
button until LE20
shows in the display. Then, press the
PROGRAMbutton toset, andchange tothe
flashing “PRESENT TIME” display.
Set Time of Day
If the words“PRESENT TIME” donot showin thedisplay,pressthe P R OGRAM button untilthey
do.
1. Press the
+
Up or
−
Down buttons tosetthe presenttime. Upmoves the display ahead;down
sets the time back.
PM
PRESENTTIME
PRESENTTIME
AM
Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons
down for fast advance. This procedure applies for all following settings.
