3. Remove the light bulb from its
socket. Replace with a 40-watt
appliance bulb.
4. Replace bulb cover, retainer, seal
and top screws. Tighten screws.
Turn the power back on at the
main power supply.
I
CAUTION: The bulb cover must be in place when using the oven. The cover
protects the bulb horn breaklng.
I
NOTE: The Oven light will not work during the self-cleaning cycle.
If you need service or assistance,
we suggest you follow these five steps:
1. Before calling for
assistance...
Performance problems often result
from little things you can fix yourself
without tools of any kind.
If nothlng operates:
l
Is the range properly connected
to gas and electrical supplies?
(See “Installation Instructions:‘)
l
Have you checked the main fuse or
circuit breaker box?
l
Is the flow of combustion and/or
ventilation air to the range
blocked?
Do not block the air
flow to and around the range.
If the oven will not operate:
l
Is the Oven Selector turned to a
setting (BAKE or BROIL, but not TIMED
BAKE)?
l
Is the Oven Temperature Control
turned to a temperature setting?
If burner falls to Ilght:
l
Is the range connected to elec-
trical power?
l
Have you checked the main fuse or
circuit breaker box?
22
l
Are burner ports clogged?
(See page20.)
If burner flames are uneven:
l
Are burner ports clogged?
(See page20.)
If burner flames Ilfl off ports, are
yellow, or are noisy when turned off:
l
The air/gas mixture may be incor-
rect. (Call for service.)
If burner makes a popplng noise
when ON:
l
Is the burner wet from washing?
Let dry.
If control knob(s) will not turn:
l
Did you push in before trying to
turn?
If the SelfCleanIng Cycle will not
operate:
l
Is the Oven Selector set on CLEAN
and the Oven Temperature Control
set on OFF?
l
Does the Start Time Dial show the
correct time of day?
l
Is the Stop Time Dial set ahead
to the time you want the cleaning
cycle to stop?
