A SERVICE OF

logo

PROBLEM POSSIBLE CAUSE
SOLUTION
Cooking
The range is not level.
Level range. (See Installation Instruc-
results are not
tions.)
what you
expected
The oven temperature seems
Adjust the oven temperature control.
too low or too high.
(See “Adjusting the oven temperature
control” on page 15.)
You have not preheated the
Preheat oven when called for in
oven as the recipe calls for. recipe.
The recipe has never been
Use only tested recipes from a
tested or is not from a reliable
reliable source.
source.
The pan used is not the type
Refer to a reliable cookbook for
or size recommended in the
recommended pan type and size.
recipe.
There is not proper air
Allow 1% to 2 inches (4-5 cm) of air
circulation around pan when space on all sides of pan. There must
baking.
be a minimum space of 1 inch
(2.5 cm).
Cooking utensil does not fit Pan shouM be the same size or
the surface unit being used.
slightly larger than surface unit being
used.
The display
shows “PF”
“Fl” or “F3”
shows in the
display
There has been a power
failure.
Reset the clock. (See page 12.)
Call for service. (See Step 3 on
page 39.)
38