. __^_._.
Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set Exhaust Control to OPEN.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
EXHAUST VENT
1
OPEN
CLOSED
To circulate room air:
I
1. Set Exhaust Control to CLOSED.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to
FAN ONLY.
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room
air circulation is desired.
I
EXHAUST VENT
(
OPEN
CLOSED
Using the energy saver set :tings
Use the Energy Saver settings when you do
not want the fan to run continuously. Using
these settings causes the fan to stop when
the compressor stops, and saves energy.
Set the Fan Control to the desired setting.
LOW - for sleeping comfort
MED - for normal cooling
QUICK COMFORT - for fastest cooling
I
ENERGY
NORMAL
SAVER FAN
Changing air direction
The air direction louvers, in the top grille
area of the front panel, control the direction
of the cooled air. Move the tabs in the
direction you want the air to flow (right, left,
or straight ahead). A tab in the center of the
louver area (on some models) adjusts the
airflow up or down.
