— 26 —
ELECTRIC COMBI OVEN
Messages
When applicable, the Oven Timer LED will display the following messages:
LCD DISPLAY MESSAGE DESCRIPTION
door The oven door is open, or the door drip tray is not in place or is missing.
Cont The Selector Knob has been rotated counterclockwise and
the oven has been placed in continuous operation mode.
HoLd (Flashing) Cook cycle is complete and oven is entering the Cook and
Hold mode.
HoLd (Steady) The oven is in Cook and Hold mode.
End Cooking has ended.
Alarms
When applicable, the Control Panel LED will display the following alarms:
LCD ALARM DISPLAY DESCRIPTION
P1NO Oven temperature sensor broken or disconnected.
P6NO Internal Product Probe is broken and/or disconnected (it is still
possible to operate the oven without the Internal Product Probe).
P7NO Oven internal electrical compartment temperature has
exceeded 158°F (70°C).
NOT Convection Fan Motor failure
*OUL Internal Product Probe temperature has exceeded 210°F (99°C).
*VOLT The power supplied to the oven is either too high or too low
for proper operation.
*EEP Invalid parameter entry.
OVF The internal product probe temperature has exceeded
212°F (use symbol)/ 100°C.
* IMPORTANT: If any of the last three alarms are displayed, it is recommended that an Authorized
Vulcan-Hart service provider be called to examine and/or repair the oven.
MESSAGES AND ALARMS
