58
3-J. ALARM CLOCK
This feature is only available when the GPS is connected to the
NMEA0183 jack. If it is connected to the GPS, the alarms are set based
on the satellite. You need to set the time previously to setting the alarm.
3-J-1. ALARM SET
This feature allows you to set the alarm.
1. Press and hold
H/L/MENU for
2 seconds.
2. Press the
PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Rotate and press the
PUSH –
SELECT knob to select ALARM
CLOCK
.
4. Press the PUSH – SELECT knob,
the following screen appears.
5. Press the
PUSH – SELECT knob at
ALARM SET.
6. You can set the hour, minutes, am or
pm by rotating the
PUSH – SELECT
knob. It will be entered when the
PUSH – SELECT knob is pressed,
and blinking digit moves to the right.
7. Press the
PUSH – SELECT knob
after you have selected am or pm.
A confirmation screen appears.
Press the PUSH – SELECT knob
and the POLARIS returns to the
ALARM CLOCK menu.
