40
To set USER MMSI code
1. Press and hold H/L/MENU for
2 seconds.
2. Press the
PUSH – SELECT knob at
SETUP, the SETUP menu appears.
3. Rotate the
PUSH – SELECT knob to
select USER MMSI.
4. Press the PUSH – SELECT knob,
the following screen appears.
5. You can now enter the USER MMSI
code. Rotate the PUSH – SELECT
knob clockwise to increase the
number, counterclockwise to
decrease. The number will be
entered when the PUSH – SELECT
knob is pressed, and the blinking
digit moves to the right.
6. After the final digit is entered, the
confirmation screen appears.
Press the
PUSH – SELECT knob.
Note: You can only program your
POLARIS twice with an MMSI
number. After that, send your
POLARIS to Uniden for factory
service.
