A SERVICE OF

logo

4 Replacement Procedures 4.6 Selectable bay module
4. Remove the following screws securing the plastic brace and the OD board and
remove them.
M2.0x8.0S BIND screw x2
5. Remove the following screws securing the plastic frame and remove it.
M2.0x3.0S S-THIN FLAT BIND screw x5
Plastic frame
M2.0x3.0S S-THIN FLAT BIND
M2.0x3.0S
S-THIN FLAT BIND
OD board
Plastic brace
M2.0x8.0S BIND
Figure 4-8 Removing the plastic frame
4-18 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)