A SERVICE OF

logo

Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.5 UWB Module
Removing the UWB Module
Remove the UWB module according to the following procedures and Figure 4.7.
1. Detach the antenna on the UWB card.
2. Disconnect two antenna cables and remove two M2x4 screws that secure the UWB card.
3. Pull the UWB module out at an angle.
M2x4*2
Figure 4.7 Removing the UWB module
Installing the UWB Module
Install the UWB module according to the following procedures.
1. Insert the UWB card into the connector.
2. Press the card down and secure it with two M2x4 screws.
3. Attach the antenna to the UWB module.
Satellite A500D Maintenance Manual 4-15