SS PIPE MOUNTING BAND - OPTION VSJ
Page 24
Stingray Level-Velocity Logger
Manual Series A.3
CODE BAND SIZE
VSJ6 6”/150 mm ID pipes
VSJ8 8”/200 mm ID pipes
VSJ10 10”/250 mm ID pipes
VSJ12 12”/300 mm ID pipes
VSJ14 14”/350 mm ID pipes
VSJ15 15”/375 mm ID pipes
VSJ16 16”/400 mm ID pipes
VSJ18 18”/450 mm ID pipes
VSJ20 20”/500 mm ID pipes
VSJ24 24”/600 mm ID pipes
VSJ30 30”/750 mm ID pipes
VSJ32-40 32-40” / 800-1000 mm ID pipes
VSJ42-54 42-54” / 1100-1375 mm ID pipes
VSJ56-72 56-72” / 1400-1800 mm ID pipes
DETAIL
BAND ADJUSTMENT
JACK
Use optional VSJ stainless steel Pipe Mounting Bands
for easy Sensor installation in round pipes.
Each Pipe Band includes:
Band Adjustment Jack allowing ±0.5” (13 mm) adjustment from
the nominal band size
Stainless steel bracket for Sensor mounting
Pre-drilled for tie wraps (included) to secure Sensor cable
!
!
!
VSJ PIPE MOUNTING BAND
BAND
ADJUSTMENTJACK
SENSORMOUNTING
BRACKET
Mounting Instructions:
Install the stainless steel pipe band with the
sensor mounting bracket at the invert (bottom)
of the pipe. Ensure that the sensor bracket is
parallel to the water surface (check with a
level). Mount so the tapered end of the sensor
will point upstream and the sensor cable will
point downstream. Turn the ¼” hex nut
clockwise to expand the bracket and secure to
the pipe wall by friction fit.
Insert the sensor into the mounting bracket and
clip or tie wrap the sensor cable securely to the
stainless steel pipe band.
FASTEN SENSOR
CABLETOPIPEOR
CHANNELWITH
METALCLIPSOR
TIEWRAPS
SENSOR
ENDVIEW
VSJ HALF-PIPE
MOUNTING BAND
ADJUSTMENT
JACK
SENSORMOUNTING
BRACKET
END
BRACKET
FLOW
