66
US
Using only the front
speakers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the subwoofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel except LFE signals.
Press 2CH/A.DIRECT repeatedly to
select “2CH ST.”.
Note
No sound is output from the subwoofer in the 2CH
STEREO mode. To listen to 2 channel stereo
sources using the front left/right speakers and a
subwoofer, select “A.F.D. AUTO” (page 61).
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input to
2 channel analog input. This function enables
you to enjoy high quality analog sources.
When using this function, only the volume and
front speaker balance can be adjusted.
1 Press one of the input buttons
to select the input you want to
listen to in analog audio.
You can also use the INPUT SELECTOR
on the receiver.
2 Press 2CH/A.DIRECT
repeatedly to select
“A.DIRECT”.
The analog audio is output.
To cancel ANALOG DIRECT
Press 2CH/A.DIRECT again.
You can also press any sound field buttons.
Notes
• When headphones are connected, “HP DIRECT”
appears on the display.
• You cannot select ANALOG DIRECT when you
select DVD, DMPORT and HDMI 1–4 as input.
2CH/
A.DIRECT
A.F.D. MOVIE MUSIC
CLEAR
/
>10
AUTO CAL
HDMI4
DISPLAY
AMP
MEN
INPUT
MODE
SLEEP
NIGHT
MODE
2CH/
A.DIRECT
1 2 3
4 5 6
7 8 9
-/-- 0/10
ENT/MEM
2CH/
A.DIRECT
A.F.D. MOVIE MUSIC
CLEAR
/
>10
SHIFT
AUTO CAL
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI3HDMI2HDMI1
HDMI4
SA-CD/
CD
DMPORTTUNER
DVD
INPUT
MODE
SLEEP
NIGHT
MODE
TV AMP
Input
buttons
2CH/
A.DIRECT
Sound
field
buttons
