7-GB
GB
Camera mounting
shoe B
Screw plate
For DCR-TRV10/TRV10E/TRV8/TRV8E
Use camera mounting shoe B,
spacer C, and the screw plate.
1 Attach the spacer C to shoe B.
2 Attach the screw plate to
position 3 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
3 Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
4 Connect the A/V connecting
cable of the shoe to the
camcorder’s AUDIO/VIDEO
jack.
Spacer C
Installation
position
of the screw plate
on the camera
mounting shoe B
For DCR-TRV900/TRV900E/TRV890E/
TRV9/TRV9E
Use camera mounting shoe B and the screw
plate.
Check the installing position of the screw plate
for your camcorder against the table below.
DCR- Camera mounting Shoe B
TRV900/TRV900E 2
TRV890E 2
TRV9/TRV9E 1
1 Attach the screw plate to
position 1 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
2 Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
3 Connect the A/V connecting
cable of the shoe to the
camcorder’s AUDIO/VIDEO
jack.
Camera
mounting
shoe B
Installation position
of the screw plate
on the camera
mounting shoe B
1
3
Screw plate
continued
