A SERVICE OF

logo

16-GB
Preparations (continued)
For DCR-PC109/PC109E/PC108/PC108E/PC107E/PC106E
1 Install the camcorder to the marine pack.
Connect the remote plug and microphone plug.
1 Connect the microphone plug to the
MIC jack (plug in power).
2 Connect the remote plug to the LANC
jack.
2 Insert the camcorder until the
mounting shoe clicks into place.
3 Connect the monitor cord to the jack of
camera mounting shoe G.
The cords are placed in the
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
front shell
1 to the MIC jack (plug in power)
2 to the LANC
jack