4
Chapter 4 Adjustments and Settings for Recording 4-69
recorded video signal, you have to attach an HDCA-901 Camera
Adaptor (not supplied). Since recorded HD SDI video signals are
output to the HD SDI OUT connector of the HDCA-901, you can
see a recorded video signal on the monitor connected to the HD SDI
OUT connector.
At the SDI/VF/MON default setting, the recorded video signals are
output to the viewfinder, MONITOR OUT connector and HD SDI
OUT connector during play back.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
5 To continue setting other items, repeat steps 3 and 4.
6 To end menu operations, turn the DISPLAY switch to ON.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.
4-8-9 Saving or Reading Setup Data to or from
the Memory Stick
Use the OPERATOR FILE page of the OPERATION menu to save the
setup data of OPERATION menu pages 1 to 8 to or read the data from a
memory stick.
Note
Settings for OVERRIDE on the AUTO IRIS page and D5600K on the
OTHERS page are not saved.
For detailed information on operations on the OPERATOR FILE page, see “4-11-2
Using Data on the Memory Stick” on page 4-93.
(Continued)
