4
Chapter 4 Adjustments and Settings for Recording4-68
To turn the D5600K gain amplifier on or off:
When color temperature is high, signal to noise ratio of blue
component becomes better as compared to the correction with the
CC filter. And also, when lighting is dark and color temperature is
high, it is possible to correct color temperature with sensitivity
higher than CC filter.
Note
When you change the setting of the D5600K gain amplifier, it is
necessary to perform automatic white balance adjustment.
For details, see “4-1-2 Adjusting the White Balance” on page 4-5.
To assign the function to the assignable switches:
Function Content
OFF Does not assign the function to the assignable switch.
D 12 dB Assigns the ON/OFF function for additional + 12 dB gain
in the digital picture element to the assignable switch.
D 24 dB Assigns the ON/OFF function for additional + 24 dB gain
in the digital picture element to the assignable switch.
VTR S/S Assigns the VTR S/S (start/stop) function to the
assignable switch.
LENS RET Assigns the same function as that of the RET switch on
the lens to the assignable switch.
RETURN Assigns the ON/OFF function to display the image of the
return video signal on the viewfinder to the assignable
switch.
PB VIDEO settings:
Select SDI ONLY to see the camera image on the viewfinder and
the monitor connected to the MONITOR OUT connector even
during playing back. You can see the image seen by the camera all
the time and change the menu setting any time you want. To see a
