![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/80/680054ce-8485-4ecd-a64a-e2e2f6bc8a13/680054ce-8485-4ecd-a64a-e2e2f6bc8a13-bg5c.png)
Digital Still Camera Features
Playback
Digital Still Camera Features
82
Playback image number/
number of recordings
Lock button
Page number/total thumbnail pages
Media Selection switch
Power switch
Image file name
Picture quality
indicator
Operation button
Digital Still Camera Features
Playback
Card Playback
Available mode:
Card Playback
You can play back and view still images
recorded on a card on the LCD monitor.
1 Set the Media Selection switch to u.
2 Hold down the Lock button and set
the Power switch to w.
• The images recorded on the card are
displayed in a thumbnail format.
3 Press j, k, l or m on the Opera-
tion button to move the selection
frame to the desired image.
• Each time you press j, k, l or m,
the selection frame moves as shown
below.
Note:
• Holding down j or k increases the
speed of motion of the selection frame.
4 Press the centre of the Operation
button.
• The selected image displays in full-
screen.
Available Operations during
Full-screen Display
• You can display the full-screen picture of the
previous or next image by pressing j or k.
• When holding down j or k, you can search
through the images on the card. The search can
be very fast, so it is recommended that the on-
screen indicators turns on to display the image
number.
• To return to a thumbnail of the images, press
the centre of the Operation button again.
Notes:
• You can also set in the mode screen to display
the images in full screen or thumbnails.
• Depending on the amount of image data
recorded by a camera other than this camcorder,
the picture quality indicator displayed during
playback may not match the picture quality
setting used during recording.
• The images bigger than 640K480, e.g. images
recorded on other equipment, display as
thumbnails, not full screen.
• Do not play back any card storing a defective
image (with noise and distortion) created on
other equipment. If you mistakenly play back
data on such a card, set the Power switch to
OFF, remove, and never use it with this
camcorder.
0100
-
00
2/2PAGE
NORMAL
1
FULLSELECT IMG MULTI
7
01
89
1000
-
00
2/1PAGE
NORMAL
1
1
4
2
5
3
6
FULLSELECT IMG MULTI
10/1
NORMA
L
0
-
00 1001
FUL
LSEL ECT IMG MUL
T I
10/1
NORMAL
0
-
001001
FULLSELECT IMG MULTI
VL-Z500E-E-082-095 04.2.17, 9:23 AM82