-18
Controlling the Monitor via LAN
Setting and Adjusting the
Monitor
(Settings & Adjustments)
Example: “Picture” screen display for COMPUTER
On these screens, you can make monitor set-
tings or adjustments. You can set or adjust
the following items :
Note
•If you click the “Refresh” button before the
screen is displayed completely, an error mes-
sage (“Server Busy Error”) will be displayed.
Wait for a moment and then operate again.
•You cannot operate this page while the
monitor is warming up.
•For details about each item, refer to the
monitor’s operation manual.
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
Note
•User Name and Password can be up to 8
characters.
•You can input the characters below :
a-z, A-Z, 0-9, -, _
Description
Setting of user name for
security protection.
Setting of password for
security protection.
It is possible to set up to three
IP addresses allowing connec-
tion to the monitor.
No limits are set to IP addresses
connecting to the monitor.
For security improvement, only an
IP address set by “Address 1-3”
can be connected to the monitor.
Items
User Name
Password
Accept IP
Address
All IP
Addresses
From only
specific IP
addresses
••
••
• AV Mode
••
••
• OPC
••
••
• Color Temp.
••
••
• DNR
••
••
• Film Mode
••
••
• Black
••
••
• 3D-Y/C
••
••
• Monochrome
••
••
•
Power Management
••
••
•
No Operation Off
••
••
• Ecology
••
••
• Old Password
••
••
• New Password
••
••
• Keylock
••
••
• Set Inputs
••
••
• Input Label
••
••
• Fine Sync
••
••
• Auto Sync
••
••
• Auto Restart
••
••
• RS-232C
••
••
• Closed Caption
••
••
• Audio Output
••
••
• Video System
••
••
• Signal Type
••
••
• Color Space
••
••
• Dynamic Range
••
••
• OSD Language
••
••
• HDMI Setup
••
••
• Resize
••
••
• Picture Flip
••
••
• Power On Delay
••
••
• LED
••
••
• Background
••
••
• Multi Screen
••
••
• Master & Slave
••
••
• Clock
••
••
• Schedule
••
••
• SleepTimer
••
••
• All Reset
