-17
Confirming the Monitor
Status (Status)
On this screen, you can confirm the monitor
status. You can confirm the following items :
••
••
• MAC Address
••
••
• Power
••
••
• Condition
••
••
• Input
••
••
• Signal Info
••
••
• Serial Number
Note
•If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be dis-
played. Wait for a moment and then oper-
ate again.
•For details about each item, refer to the
monitor’s operation manual.
Controlling the Monitor via LAN
Controlling the Monitor
(Control)
On this screen, you can perform monitor con-
trol. You can control the following items :
••
••
• Power
••
••
• Input Select
••
••
• Volume
••
••
• AV Mute
Note
•If you click the “Refresh” button before the
screen is displayed completely, an error mes-
sage (“Server Busy Error”) will be displayed.
Wait for a moment and then operate again.
•You cannot operate this page while the moni-
tor is warming up.
•While the monitor is in standby mode, you
can only control “Power ON”.
•For details about each item, refer to the
monitor’s operation manual.
