![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/5c/15ca609c-62ed-482f-9562-b9984d78c8cf/15ca609c-62ed-482f-9562-b9984d78c8cf-bgc.png)
Connecting the Power Cord
Caution
• Useonlythepowercordsuppliedwiththemonitor.
1. Turn off the main power switch.
2.Plugthepowercord(supplied)intotheACinputterminal.
3.Plugthepowercord(supplied)intotheACpoweroutlet.
AC input terminal
1
Main power switch
Power cord (Supplied)
For power
outlet
2
3
Preparing the Remote Control Unit
Installing the batteries
1. Press the cover gently and slide it in the direction of the
arrow.
2. See the instructions in the compartment and put in the
batteries(R-6(“AA”size)x2)(suppliedwiththePN-ZR01
(optional))withtheirplus(+)andminus(-)sidesoriented
correctly.
3.Closethecover.
TIPS
• Whenthebatteriesbecomeexhaustedreplacethemwith
new (commercially available) batteries.
• Thesuppliedbatteries(R-6(“AA”size)x2)maybecome
exhausted quickly depending on how they are stored.
• Ifyouwillnotbeusingtheremotecontrolforalongtime,
remove the batteries.
• Usemanganeseoralkalinebatteriesonly.
Remote control operation range
TheoperationrangeofthePN-ZR01(optional)remotecontrol
unit is approx. 23 feet (7 m) when aimed directly at the remote
controlsensorbox.Whenusedatanangleofapprox10°from
the center to the top/bottom/right/left of the remote control
sensor,useitwithinadistanceofapprox16.4feet(5m).
Remote control
sensor
10º10º
16.4 feet
(5 m)
16.4 feet
(5 m)
23.0 feet
(7 m)
23.0 feet
(7 m)
TIPS
• Donotexposetheremotecontrolunittoshockbydropping
or stepping on it. This could lead to a malfunction.
• Donotexposetheremotecontrolunittoliquids,anddonot
place it in an area with high humidity.
• Theremotecontrolunitmaynotworkproperlyiftheremote
control sensor is under direct sunlight or strong lighting.
• Objectsbetweentheremotecontrolunitandtheremote
control sensor may prevent proper operation.
• Replacethebatterieswhentheyrunlowasthismay
shorten the remote control’s operation range.
• Ifauorescentlightisilluminatedneartheremotecontrol
unit, it may interfere with proper operation.
• Donotuseitwiththeremotecontrolofotherequipment
such as air conditioner, stereo components, etc.
• AdjusttheangleofthePN-ZR01(optional)remotecontrol
sensor and have it face the area where operation with the
remote control unit will take place.