![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/34/a344567a-df52-48cc-9333-c048ae005042/a344567a-df52-48cc-9333-c048ae005042-bgb.png)
ENGLISH
9
E
How to Install the Monitor
Mounting precautions
• Sincethemonitorisheavy,consultyourdealerbefore
installing, removing or moving the monitor.
• Wheninstalling,removingormovingthemonitor,ensure
that this is carried out by at least 2 people.
• Whenmovingthemonitor,besuretoholditwiththe
handles both on the rear and the unit bottom. Do not hold
the LCD panel. This may cause product damage, failure, or
injury.
• Installthemonitorwiththesurfaceperpendiculartoalevel
surface. If necessary, the monitor may be tilted up to 20
degrees.
• Mountingthemonitoronthewallrequiresspecialexpertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Thismonitorshouldbeusedatanambienttemperature
between 32°F (0°C) and 104°F (40°C). Provide
enough space around the monitor to prevent heat from
accumulating inside.
1-3/8 [3.5]
1-
15/16
[5]
1-
15/16
[5]
1-15/16 [5]
11-13/16 [30]
• Ifitisdifficulttoprovidethismuchspaceforanyreason
such as the installation of the monitor inside a housing, or if
the ambient temperature may be outside of the range of 32
°F (0°C) to 104°F (40°C), install a fan in the housing or take
other measures to keep the ambient temperature within the
required range.
• Donotblockanyventilationopenings.Ifthetemperature
inside the monitor rises, this could lead to a malfunction.
• Aftermounting,itisrecommendedtotakesomemeasures
to prevent the monitor from falling down. Secure the
monitor by fastening the hooks at the top of the monitor to a
wall or a pillar with strong cord and brackets (not included).
• Donotplacethemonitoronadevicewhichgeneratesheat.
• Thismonitorisxedtothetemporarystandwhenshipped
from the factory. Please note that this stand is for temporary
use only until the monitor is properly mounted.
• Besuretouseastandorawall-mountbracketdesignedor
designated for mounting the monitor.
• Thismonitorisdesignedtobeinstalledonaconcretewall
or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before
starting installation.
This monitor and bracket must be installed on a wall which
can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material
and the structure.