7-35
SYSTEM SETTINGS
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the network scanner function is available.
*3 When the Internet fax expansion kit is installed.
*4 When the facsimile expansion kit is installed.
*5 When the application integration module is installed.
Device Control
Operation from Specified PC
7-68
Operational Authority Prohibited
Hostname or IP Address of PC –
View Password Entry Screen Display in Both PC and MFP
Operation by User who Has Password
Operational Authority Prohibited
View Password Entry Screen Display in Both PC and MFP
● Soft Keyboard Template Setting – 7-68
Item Factory default setting Page
■ Device Control
7-69
● Other Settings 7-69
Original Feeding Mode All Disabled 7-69
Saddle Stitch Position Adjust*
1
0.0 mm 7-69
Auto Paper Selection Setting Plain Paper 7-69
Tandem Connection Setting
7-69
IP Address of Slave Machine 0.0.0.0
Port Number 50001
Disabling of Master Machine Mode Disabled
Disabling of Slave Machine Mode Disabled
Detect Standard in Auto Colour Mode – 7-70
Auto Switching of Finisher Trays*
2
Enabled 7-70
Optimization of a Hard Disk – 7-70
Clear All Job Log Data – 7-70
● Original Size Detector Setting
7-71 Original Detection Size Combination Varies depending on country and region
Cancel Detection at Document Glass Disabled
● Disabling of Devices 7-72
Disabling of Document Feeder Disabled 7-72
Disabling of Duplex Disabled 7-72
Disabling of Large Capacity Cassette*
3
Disabled 7-72
Disabling of Tray Settings Disabled 7-72
Item Factory default setting Page
