14
Using AV Link function
This TV incorporates four typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected
audiovisual equipment (e.g. VCR, DVD) enters standby
mode as well.
WYSIWYR (What You See Is What You
Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.
NOTE
• Refer to operation manuals of each external equipment for
the details.
• Only works when the audiovisual equipment is connected
to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.
• The use of the AV Link function is only possible if the TV-
set has enforced a complete auto-installation with the
connected audiovisual equipment (Page 8, initial auto
installation).
The availability of the AV Link function depends on
the audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
Using external equipment
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player.
Power on the AQUOS BD Player, select
appropriate external input source using
b
.
Open the remote control’s fl ip cover.
Press OPTION.
• The AQUOS LINK menu displays.
Press
a
/
b
to select “Top Menu/Title List”, and
then press OK.
• The title list data from the connected AQUOS BD
Player displays.
• You can use END,
6
, OK,
a
/
b
/
c
/
d
and the
coloured buttons.
Select the title with
a
/
b
/
c
/
d
, and then press
PLAY
I
.
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
Open the remote control’s fl ip cover.
Press OPTION.
• The AQUOS LINK menu displays.
Press
a
/
b
to select “Media change”.
Select the desired medium, such as DVD or
HDD. The media type changes every time you
press OK.
HDMI device selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Open the remote control’s fl ip cover.
Press OPTION.
• The AQUOS LINK menu displays.
Press
a
/
b
to select “Model select” and then
press OK. The HDMI device changes every time
you press OK, and the menu screen goes out.
Recording via the AQUOS Recorder EPG (only
for recorder)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
Power on the AQUOS BD Player, select
appropriate external input source using
b
.
Open the remote control’s fl ip cover.
Press OPTION.
• The AQUOS LINK menu displays.
Press
a
/
b
to select “AQUOS Recorder EPG”,
and then press OK.
• The recorder’s EPG is displayed.
• You can use END,
6
, OK,
a
/
b
/
c
/
d
and the
coloured buttons.
Select the programme to record.
• Refer to the operation manual of the recorder for
details.
1
2
3
4
5
1
2
3
4
1
2
3
1
2
3
4
5
LC-52XL1E_gb_a.indd 14LC-52XL1E_gb_a.indd 14 2007/04/25 16:41:242007/04/25 16:41:24
