6
■ Before connecting cables and cords to the rear terminals, remove the
terminal cover. Push in the tab and pull out the terminal cover carefully.
■ To mount the cover, insert the 2 hooks on the bottom of the cover
into the cabinet and press on the upper part of the terminal cover
until the tab locks in place with a click.
Removing the Terminal Cover
Bundling Cables with Clamp
• Secure cables and cords with the supplied
cable clamp so that they do not get caught
when mounting the cover.
Cable clamp
PREPARATION (Continued)
LC-20S1M
LC-13/15S1M
■ Before connecting cables and cords to the rear
terminals, remove the terminal cover. Push in the 2
tabs on the right side of the terminal cover and pull it
out carefully to the left.
■ To mount the cover, insert the 2 hooks on the left side
of the cover into the cabinet and press on the right part
of the cover until the tabs lock into place with a click.
