17
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENUSOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CHVOL
MENU
SLEEP DIS.MODE
OKMPX
SUBTITLE END
HOLD
SUBPAGE
REVEAL
TEXTBRIGHT
TV/VIDEOPOWER
MENU
VOL(+)/(–)
CH ( )/( )
CHANNEL
SELECT
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2 Press MENU (PRESET-1) to
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
3 Select the channel position using
CHANNEL SELECT or CH (
)/
(
).
4 Press VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5 Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6 Press MENU (PRESET-1) to
return to the normal screen.
Note:
•
SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
PRESET (Continued)
AUTO → MANUAL → LANGUAGE →
NORMAL
SCREEN
■ Setting a channel to a desired TV
station:
Presetting the Channels (MANUAL)
Upper control panel
Sound System
Auto mode screen
Manual mode screen
Channel position
number
■ In a weak reception area, or under
bad reception conditions.
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2 Press MENU (PRESET-1) to
display the MANUAL mode screen.
3 While the MANUAL mode screen
is displayed, press MENU (PRE-
SET-1) for more than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU (PRESET-1).
(The LANGUAGE mode screen will
appear.)
4 Adjust for good reception using
VOL (+)/(–).
5 After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
➡
➡
MENU
SELECT:
EXIT:
ENGLISH
Upper control panel
12
PRESET
4 3 1, 2, 6
12
PRESET
4 1, 2, 3, 5
