Key Operator Setting
128
6
G4 Digital Line
This function must be set when you
connect the machine to the ISDN dig-
ital line.
You can register the following items:
• TID (up to 22 digits)
• Own Digital Number (up to 29
digits)
Note
❒ Optional ISDN Unit required.
❒ You can use a G4 TID if you use the
ISDN. The G4 TID is information
to be printed on a destination ma-
chine when you send a fax using
G4 down the ISDN.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile} key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the function number for
“G4 Digital Line” with the
number keys.
Note
❒ If “G4 Digital Line” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
To Enter the TID
A
Enter the function number for
“TID” with the number keys.
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us200-1.tif
Us201-2.tif
