Preparations for Use as a Network Scanner
24
2
Recalling a Program
A Make sure the {Scanner} key is se-
lected, press the {Program} key.
B Press [Recall].
C Press the number of the program
you want to recall.
The stored settings are displayed.
Note
r Program numbers with m al-
ready have settings in them.
D Place the originals, and then press
the {Start} key.
Changing a Stored Program
A Make sure the {Scanner} key is se-
lected, press the {Program} key.
B Press [Recall].
C Press the number of the program
you want to change.
D Change settings of the program.
E Press the {Program} key.
F Press [Register].
G Press the number of the program
you changed the setting.
H Press [Register] to accept the con-
firmation message.
I Enter a program name.
J Press [OK].
Deleting a Program
A Make sure the {Scanner} key is se-
lected, press the {Program} key.
B Press [Delete].
C Press the number of the program
you want to delete.
D Press [Yes].
The program is deleted, and the
display returns to the initial dis-
play after a moment.
Changing the program name
A Make sure the {Scanner} key is se-
lected, press the {Program} key.
B Press [Change Name].
C Press the number of the program
you want to change name.
D Enter a new program name.
A program name can be entered
up to 40 characters.
For details about entering charac-
ters, see “Entering Text”, General
Settings Guide.
E Press [OK].
The display returns to the initial
display after a moment.
