Camera 97
Configuring the Camcorder
ᮣ
Before taking a photo, press
Menu
(LSK) to access the
camcorder options.
• Camcorder
: allows you to record a video.
•Mode
:
limit the size of videos. Choose Normal or Limit for MMS.
•Size
: if Limit setting is Normal, displays either 320x240 or 176 x
144.
• White balance
: choose a setting to match conditions. Choose from
Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
•Exposure meter
:
choose how the camera measures the light
source: Matrix, Center-weighted or Spot.
• Effects
: apply special effects to the photo. Options include: None,
Black and White, Sepia, Negative, or Watercolor.
• Default destination
: Remove a current destination location or
Change the current location.
•Timer
: set a time delay between the time you press and
the video starts to record. Select the length of delay, from Off, 2
seconds, 5 seconds, or 10 seconds.
• Viewfinder mode
: select Full screen view and guidelines. or
Standard ratio view.
• Settings
:
–
Video
: set the Quality of the video, to Economy, Fine, or Superfine, and
set Audio recording to On or Off.
–
Setup
: configure the Review screen, Default storage, or view
camcorder Shortcuts.
Camcorder Shortcuts
Shortcut keys allow you to change some settings using the
keypad, Navigation keys, and Volume key while in capture mode.
Note:
These button functions also apply to the camcorder feature if it is
accessed via
Menu
(LSK) ➔
Media
➔
Videos
➔
Record video
.
shoots video.
Navigation
Keys
Left
and
Right
navigation keys adjust the image
brightness.
Up
and
Down
navigation keys zoom in and out.
Allows you to switch between Camera
and Camcorder modes
changes the size of the image being recorded.
cycles among the various timer modes (Off, 2
seconds, 5 seconds, or 10 seconds).
changes the viewfinder mode.
t259_Sienna.book Page 97 Wednesday, January 19, 2011 11:30 AM
