English - 10
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1 In the first three cases, connect the aerial or network input cable to
the ANT IN on the rear of the television.
2 If you are using an indoor aerial, you may need to adjust it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ (Digital TV) “Updating the Channel List Automatically” on
page 24
◆ (Digital TV) “Updating the Channel List Manually” on page 25
◆ (Analog TV) “Storing Channels Automatically” on page 42
◆ (Analog TV) “Storing Channels Manually” on page 44
Connecting to an Aerial or Cable Television Network
Rear of the TV
Cable Television
Network
or
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 10
