Section 8
146
• Auth Type: select a connection type.
• User ID: enter the user ID required to connect to the network.
• Password: enter the password required to connect to the
network.
• Protocol: select a web page format. Select HTTP, Other or
WAP.
• Home URL: enter the address of your startup homepage.
When the default homepage displays, you can delete it by
pressing and holding the
key.
• Proxy Address/Gateway Address: enter the WAP Gateway
IP Address or HTTP Proxy IP Address required to connect to
the Internet.
Note: The Proxy Address/Gateway Address field is determined by your
Protocol selection.
• Port: enter the Proxy port required to connect to the Internet.
Note:When you set HTTP in Protocol, Secure Connection will appear in the
display.
• Secure Connection: allows you to turn the secure
connection type on or off.
• Linger Time (Sec.): enter a time that will disconnect the
WAP browser if there is no activity.
• Advanced Settings: allows you to enable and enter a Static
IP address, a Static DNS address or select a Traffic Class.
8. When you have finished, press the Save soft key or the
key.
Template.book Page 146 Wednesday, December 28, 2005 7:02 PM
