109
• Brightness
: configures the LCD Brightness levels. Tap Automatic
brightness to allow the phone to self-adjust and tap OK.
• Auto-rotate screen
: allows you to switch the display orientation
automatically when you rotate the phone.
•Animation
: determines whether some or all of the window
elements animate. Selections are: No animations, Some
animations, and All animations.
• Screen time-out
: adjusts the delay time before the screen
automatically turns off. Selections are: 15 seconds, 30 seconds, 1
minute, 2 minutes, and 10 minutes.
• Touch key light duration
: allows you to set the time that the touch
keys located on the bottom of your phone are lit.
• Auto adjust screen power
: allows you to save power because the
phone analyzes the displayed screen image and adjusts the LCD
brightness.
• Gyroscope calibration
: allows you to calibrate the gyro sensors.
Place your device on a level surface and tap
Calibrate
.
Power Saving
Power Saving allows you to manage your phone to conserve
power.
1. From the Home screen, tap ➔
Settings
➔
Power
saving
.
2. The following options are available:
• System power saving
: uses the default power settings. Settings
will be enabled immediately when this option is selected.
• Custom power saving
: allows you to customize your power
settings. Settings will be enabled immediately when this option is
selected.
• Custom power saving settings
: allows you to customize your
power settings. After selecting Custom power saving the following
options are enabled after you tap
Custom power saving settings
.
–
Power saving on at
: allows you to set the percentage of battery power
remaining that Power saving will begin. Choose between 10%-50%.
–
Turn off Wi-Fi
: automatically turns off Wi-Fi when you are not
connected with Mobile AP.
–
Turn off Bluetooth
: automatically turns off Bluetooth when it is not in
use.
–
Turn off GPS
: automatically turns off GPS when it is not in use.
–
Turn off Sync
: automatically turns off Sync when the phone is not
synchronizing with the server.
–
Brightness
: allows you to manually adjust the brightness of the screen.
Tap this option to enable the next Brightness option.
–
Brightness
: allows you to set the Brightness percentage of the screen.
–
Screen time-out
: allows you to set the time before the screen times
out and goes into lock mode.
• Learn about power saving
: describes various ways to conserve
battery power.
