Settings
138
Edit: To review or change the selected profile.
New: To create a new profile.
Rename: To change the name of the profile.
Delete: To remove a profile from the list.
Restore: To return to default settings.
For each profile, the following information must be entered when you select
New or Edit from the <Options> menu:
Set Name: Enter the profile name.
Access Name: Enter the access point name. This is the gateway
address required to access the Internet.
Auth Type: Select the type of authentication used for this WAP
connection (None, Normal, or Secure).
User ID: Enter the User ID required to connect to the network.
Password: Enter the password required to connect to the network.
Protocol: Set the connection protocol used by the WAP browser: WAP,
HTTP, or Other.
Home URL (WAP or HTTP only): Enter the URL address of the page to
be used as your home page.
Proxy Address (HTTP only): Enter the gateway address of the proxy
server.
Gateway address (WAP only): Enter the gateway address of the proxy
server.
Secure Connection (WAP only): Turns secure connection on or off.
Port (HTTP only): Enter the connection port.
Linger Time: Set a time period after which the network is disconnected
if there has been no new data traffic during that time.
Advanced Settings: Allows you to configure IP-specific information:
Static IP, Static DNS and Traffic Class.
