Getting Started
20
1. With the battery in position on the phone,
connect the lead from the travel adapter to the
bottom of the phone.
2. Connect the adapter to a standard AC wall
outlet.
3. When charging is finished, disconnect the
adapter from the power outlet and from the
phone by pressing the gray tabs on both sides of
the connector and pulling the connector out.
Note
: Do not remove the battery from the phone
without unplugging the adapter while it is
charging. If you do this, the phone may be
damaged.
Getting Started
21
Using the Battery Charger
Using the battery charger, you can charge the
battery alone.
1. Insert the battery into the charger, ensuring that
the terminals on the battery are in contact with
those on the charger. Press the battery down
until it clicks into place.
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger will indicate the
charging progress by the following colours:
• Red: the battery is charging.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged in
or operating in a too high or too low
temperature.
