5VQTKPI2CWUGUKPC2JQPG$QQM'PVT[
To store a number in your Phone Book that contains pauses:
1. Enter the phone number you want to connect to (such as
the bank’s teleservice phone number).
2. Press . More options display. Press or
to enter the desired pause:
♦ Press to enter a Hard Pause. The letter “p”
displays in the number, meaning that a hard pause will
occur at that point in the dialing sequence. Enter the
digits that need to follow the pause (such as your
account number).
♦ Press to enter a 2 second pause. The letter “T”
displays in the number, meaning that a “Timed” pause
will occur at that point in the dialing sequence. Enter
the digits that need to follow the pause (such as your
account number).
3. Store the number as you normally would by pressing the
key and entering a name.
2CWUG&KCNKPIHTQOC5VQTGF2JQPG$QQM'PVT[
Pause dialing from the Phone Book is easy:
1. If you stored the number using a 2 second pause(s), simply
dial the number as you normally would, and you are
finished. The phone transmits the number that follows the
“T” pause two seconds after connection. “Tpause” displays
when you dial the number.
2. If you stored the number using a hard pause(s), then dial
the teleservice number and wait to be prompted by the
service for the number (credit card number, bank account
number, etc). When prompted, press to send the
DTMF number that follows your pause. “SENDING DTMF”
flashes on the screen, and the transmitted tones are
audible.
