10 Hardware and Software Setup
Step 3: Connecting the USB 2.0 Cable/Installing the Driver
Connect the Printer to your PC
or Mac with your beige
USB 2.0 Cable.
If you are using a PC:
If you are using a PC, after a few
moments, Windows will tell you
it has found new hardware and is looking for software to
install it.
If you are using Windows XP, select "Install the software
automatically" and click Next or if you are using Windows
Vista click "Locate and install driver software"
You will see a notice like the one shown below depending on
which operating system you are using. Click Install Anyway
or Install this driver software anyway to continue installing
the printer driver for your Publisher.
Windows XP Windows Vista
Windows XP Message Windows Vista Message
510921PM.qxd 1/25/2007 8:52 AM Page 10
