42
English
DVD System Menu Options (continued)
Video Setup Page (underlined options are the factory default settings)
Component Select the type of video output that matches the video
connection between the DVD system and your TV.
{ YUV } – Select this if you have connected the Junction
Box to your TV using the component video
sockets (Y Pb Pr).
{ RGB } – Select this if you have connected the Junction
Box to your TV using the SCART socket.
HDMI Setup It provides the picture settings to enhance the appearance and
picture quality for disc playback.
{ Wide Screen Format } – Select a suitable screen display.
This feature is only available if you have selected
{ TV Display – 16:9 Wide Screen }.
{ Superwide }
Select this to display the 4:3 picture disc on the
wide-screen TV with non-linear stretching (centre
position of the screen is stretched less than the
side).
{ 4:3 Pillar Box }
Select this to display the 4:3 picture disc on the
wide-screen TV without stretching. Black bars will
be shown on both sides of the TV screen.
{ Off }
No aspect ratio adjustment is made when this
option is selected.
Note: The { Wide Screen Format } feature will be disabled if your HDMI
TV has been preset to { 480p } or { 576p } settings .
{ HDMI Video }– Select this to further enhance your HDMI
video output.
{ 480p }
Progressive output in 480 lines for NTSC TV.
Selecting this will disable the { Wide Screen
Format } feature.
{ 576p }
Progressive output in 576 lines for PAL TV.
Selecting this will disable the { Wide Screen
Format } feature.
{ 720p } - (if a HDMI TV is connected)
Progressive output upscale to 720 lines.
{ 1080i } - (if a HDMI TV is connected)
Interlaced output upscale to 1080 lines.
