41
English
DVD System Menu Options (continued)
Video Setup Page (underlined options are the factory default settings)
Progressive In the progressive scan mode, you can enjoy high quality picture
with less ickers. It only works when you have connected the
Y Pb Pr sockets on the Junction Box to your TV that supports
progressive video input. Otherwise, the image may not appear or
will be distorted.
This option is only available if you have selected { YUV } in the
{ Component } option. See next page “Video Setup Page –
Component” for details.
{ Off } – Disable the progressive scan function.
{ On } – Enable the progressive scan function.
Note: If no picture appears, wait for 15 seconds for auto
recovery. Otherwise, turn off the progressive scan as below:
1) Press çEJECT on the DVD system.
2) Press X on the remote control.
3) Press SUBTITLE on the remote control.
Picture Setting This DVD system provides three prede ned sets of picture
colour settings and one personal setting which you can de ne
yourself.
{ Standard } – Original colour setting.
{ Bright } – Vibrant colour setting.
{ Soft } – Warm colour setting.
{ Personal } – Select this to personalise your picture colour
by adjusting the brightness, contrast, tint and
colour (saturation).
Use W X keys to adjust to the setting that
best suit your personal preference and press
OK to con rm. For an average setting,
select { 0 }.
{ Brightness }
Increase this value to brighten the picture colour
or vice versa.
{ Contrast }
Increase this value to sharpen the picture colour or
vice versa.
{ Tint }
Increase or decrease this value to change the
colour phase of the picture.
{ Color }
Increase this value to enhance the picture colour
or vice versa.
Brightness
Contrast
Tint
Color
Personal Picture Setup
