A SERVICE OF

logo

8 C307M-I (11/05)
Installation
1. When installing the ES30C/ES31C Esprit
®
system, allow for sufficient clearance between the top of the unit and overhead obstructions.
This will prevent interference when the enclosure is driven to its maximum elevation of 33 degrees.
2. Remove the transformer module from the base of the system by
loosening the four Phillips screws and lifting the module.
3. Attach the base of the system to an Esprit mount (EWM or EPA)
with the three 10-32 screws and washers (supplied).
A
33.0°
B
CD
Model ES30 ES31
A
16.6
(42.5)
16.9
(42.9)
B
9.4
(23.9)
9.7
(24.6)
C
7.1
(18.1)
7.6
(19.2)
D
4.2
(10.7)
4.6
(11.7)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
BASE
LOOSEN
PHILLIPS
SCREWS
TRANSFORMER
MODULE
BASE
MOUNT
MOUNTING
SCREWS